Chudds PowerSports is conveniently located in Gimli, Manitoba, a lakeside resort community on the westshore of Lake Winnipeg, just 45 minutes north of Winnipeg on Highway 8. Our new online Parts Lookup system makes it easy to access our large inventory of parts for Arctic Cat, Polaris, Suzuki, Husqvarna MC, Mercury Marine, ARGO, and Sherp. We ship parts daily across Canada and into our northern communities.
*While supplies last. May not be exactly as shown. OAC. Prices subject to change without notice. Rebates and discounts to dealer. Unless otherwise noted, price does not include freight or PDI. See dealer for details. MB Dealer Permit #1018.
2024 Suzuki Marine DF250TLSS
$31,852.00
Key Features
New/Used New
Usage0 Hours
Availability
In Stock
LocationChudds PowerSports
Stock #
SZ24191
VIN
25004F-440698
Condition
Excellent
# of Axles0
# of Engines0
Beam0.0
Engine Year0
Horsepower0.0
Max Draft0.0
Product Features
Dealer Notes
The Suzuki Marine Keep Calm and Boat on Sales Event continues with Savings to put a Spring in your Step! This unit received 5 years of Suzuki Protection coverage AND there are other discounts available. Contact our knowledgeable sales staff for details. Offer ends July 2nd, 2024. Price plus $495 freight and setup.
Description
DF250TLSS- Matte Black, Electric, 20" Shaft Length, PTT
Suzuki’s 250SS Started It All.
The first V6 4-Stroke that was specifically built to power tournament Bass Boats, larger Flats Boats, performance Pontoon Boats and even serious Ski Boats. The other guys were quick to notice and built a few copy cat outboards. But nothing comes close to the DF250SS… a Big Block “Hot Rod” that will put an ear-to-ear grin on the face of any boater with a need for speed and power. The DF250SS comes standard in a Matte Black finish.
Key Features
- Tilt Limit System: To protect the boat and motor from damage that can occur when tilting the motor, both outboards incorporate a user adjustable tilt limit switch that prevents the outboard from tilting beyond a predetermined point.
- Continuously Variable Valve Timing: The DF250 incorporates Suzuki’s advanced Variable Valve Timing (VVT). VVT is used to alter intake timing with the camshaft to optimize camshaft timing for low to mid-range operation. Combined with the outboard’s aggressive cam profile VVT delivers greater low to mid-range torque for powerful acceleration.
- Multi Stage Induction: Suzuki’s Multi-Stage Induction system is used to increase engine performance. Each cylinder in this system is equipped with a set of short and long intake manifolds that are utilized in relation to engine speed. At lower rpm the longer pipes deliver an optimum volume of fresh air into the chamber, improving combustion and boosting low-end torque. At higher rpm, the valve on the shorter, direct intake pipe opens up letting air in the chamber directly boosting high-speed power output. (DF250/225)
- Offset Drive Shaft: Pioneered by Suzuki, the use of the offset drive shaft on four-stroke outboards has long been utilized to reduce the size of the outboard. Found on all Suzuki four-strokes from the DF70A and up, this design positions the crankshaft in front of the drive shaft simultaneously moving the outboard’s center of gravity forward. While the design contributes greatly to the outboard’s overall compactness and increased power performance, it also moves the engine’s axis of inertia, the point where engine vibrations are at a minimum, up over the upper engine mount, thus greatly reducing vibration. These outboards also incorporate two-stage gear reduction designed to take maximum advantage of the power produced by these high-performance engines.
Technologies
- Offset Driveshaft: Pioneered by Suzuki, the use of the offset drive shaft on four-stroke outboards has long been utilized to reduce the size of the outboard. Found on all Suzuki four-strokes from the DF70A and up, this design positions the crankshaft in front of the drive shaft simultaneously moving the outboard's center of gravity forward. While the design contributes greatly to the outboard's overall compactness and increased power performance, it also moves the engine's axis of inertia, the point where engine vibrations are at a minimum, up over the upper engine mount, thus greatly reducing vibration. These outboards also incorporate two-stage gear reduction designed to take maximum advantage of the power produced by these high-performance engines. Providing a large final drive ratio, it delivers powerful torque for quick acceleration and great top-end speed.
- 2-Stage Gear Reduction: This system which incorporates the Offset Driveshaft features a first stage reduction between the crankshaft and driveshaft, and a second stage reduction inside the gear case. This design makes a larger gear ratio possible, allowing it to turn a large diameter propeller. Advantage: High propulsive efficiency with large diameter propeller, Powerful navigation, maintaining propeller rotation even with a larger load and increased power to turn large diameter propellers, offering quick acceleration.
- Multi-stage Induction: Getting the right amount of air into the cylinder has a great impact on performance. High-speed operation typically requires a greater volume of air, low-speed less. Suzuki's Multi-Stage Induction system meets these needs by utilizing two intake manifold pipes per cylinder to ensure the engine gets the right amount of air. At low rpm, air enters the combustion chamber through a longer, curved manifold pipe designed to improve combustion and improve low-end torque. As rpm increases, the valves open on the direct intake pipes. Shorter and lacking resistance, these pipes allow a greater volume of air into the chamber, increasing the engine's ability to breathe efficiently at high rpm resulting in higher power output during high-speed operation.
- VVT - Variable Valve Timing: Suzuki's engineers designed the 4.0-liter V6 engine and other models with an aggressive cam profile that delivers maximum output and performance at high rpm. In coupling this cam profile with Suzuki's advanced Variable Valve Timing (VVT), the DF300AP/250AP and other models delivers the additional torque that outboards need for accelerating in the low to mid-range. VVT achieves this by adjusting the timing of the intake valves, allowing them to open before the exhaust valves are fully closed, creating a momentary overlap in the timing where both sets of valves are open. Using VVT, this overlap can be increased or decreased by altering intake timing with the camshaft resulting in optimum timing for low and mid-range operation.
- Anti-Corrosion Finish: To guard against corrosion, Suzuki protects its outboards with its own specially formulated Suzuki Anti-Corrosion Finish. Applied directly to the outboard's aluminum alloy, this finish provides maximum bonding of the finish to the aluminum surface. Layering an epoxy primer undercoat, black metallic (or white) finish, and clear acrylic fiber finish on top of this forms an effective treatment against corrosion, protecting those parts of the outboard's aluminum alloy that are constantly exposed to saltwater.
- Precision Control: Suzuki Precision Control is a computer-based throttle and shift system that replaces mechanical control cables with a digital fly-by-wire system to eliminate friction and resistance in the controls. The system provides smooth and precise control along with crisp, immediate shifting which are particularly helpful during low rpm operation and when maneuvering. Combined with Suzuki's Lean Burn Control System, the system also helps to improve fuel efficiency over a wide operating range. Suzuki Precision Control also features safeguards that help protect the engine and drive against damage due to mishandling and is compatible with single, twin, or triple installations as well as dual station operation.
- Tilt Limit System: A tilt limit system that prevents the outboard from tilting beyond a certain angle to prevent contact with certain boats.
Specifications
- Transom Height: 20 in.
- Starting System: Electric
- Weight: 578 lb.
- Engine Type: DOHC 24-Valve
- Fuel Delivery System: Multi Point Sequential Electronic Fuel Injection
- Piston Displacement: 245.6 cu. in. (4028 cc)
- Bore x Stroke: 98 mm x 89 mm (3.81 in. x 3.46 in.)
- Max Horse Power Output: 250 HP
- Operating Range: 5300 - 6300 RPM
- Steering: Remote
- Oil Pan Capacity: 8.5 qt. (8.0 L)
- Ignition System: Solid State Direct Ignition
- Trim Position: Power Trim and Tilt
- Gear Ratio: 2.08:1
- Standard Propeller: Optional
- Propeller Selection: 17"-32"
Warranty
- 60 month warranty ( includes 36 month factory warranty plus 24 month promotion warranty)
Engine
| Engine Type | DOHC 24-Valve, V6 |
| Bore x Stroke | 98 mm x 89 mm (3.81 in. x 3.46 in.) |
| Displacement | 245.6 cu. in. (4028 cc) |
| Starting | Electric |
Dimensions
| Shaft Length | 20 in. |
| Weight | 578 lb. |
General
| Trim Method | Power Trim and Tilt |
| Propshaft Horsepower | 250 HP |
| Full Throttle Operating Range | 5300 - 6300 RPM |
| Gear Ratio / Shift | 2.08:1 |
| Fuel Induction | Multi Point Sequential Electronic Fuel Injection |
| Steering | Remote |
| Warranty | 60 month warranty ( includes 36 month factory warranty plus 24 month promotion warranty) |
